Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Palo Alto, CA
Garage door installation in Palo Alto costs between $700 and $2,200 for a standard single or double door, depending on material, insulation, and whether custom sizing is needed for older openings. Most homes here were built between the 1950s and 1970s, and the garages on those properties frequently have nonstandard dimensions that mid-century builders framed to match the house rather than a catalog spec. Commodore Garage Door Repair has served Palo Alto since 2015, working across ZIP codes 94301, 94302, 94303, and 94304. If your door or opener is giving you trouble, call us at (877) 358-3130 for a straight diagnosis and a written price before any work begins.
Why Palo Alto Homes Are Different
Palo Alto’s garage work is dominated by the Eichler-style single-story homes and mid-century tracts built between the 1950s and 1970s. Those houses came with original low-headroom, side-mounted torsion systems, thin-gauge wood or hardboard panels, and garage-to-house sightlines that architects designed to keep the garage from dominating the facade. Because the city sits in a mild, dry Mediterranean climate with rare freezes and no snow, the failures we see are driven less by weather and more by age and seismic-related racking. The 1989 Loma Prieta earthquake shifted framing on thousands of Peninsula garages, and we still correct track alignment and spring geometry from that event on service calls today.
The other thing that sets Palo Alto apart is the city’s design review culture. Homeowners remodeling under the strict Single-Family Individual Review process often want a modern opener hidden behind a restored mid-century door face. That means we’re frequently re-engineering the spring system in place rather than swapping in a modern center-mount kit, because the low headroom in an Eichler garage won’t accept standard hardware. Summer heat on older opener logic boards and winter rain intrusion around perimeter seals on untreated wood panels are the two seasonal concerns we address most often in neighborhoods like Midtown, Professorville, Greenmeadow, and the College Terrace area.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Main Palo Alto Services
The two calls we field most from Palo Alto homeowners are for doors that won’t open in the morning and openers that run but don’t move the door. Here’s what each involves locally.
Garage Door Repair in Palo Alto
Springs, cables, rollers, and track alignment make up the bulk of our repair calls in Palo Alto. The torsion spring on an original mid-century door is often a custom-length assembly that has been wound and rewound over decades, and when it fails, the door drops hard and won’t lift manually. We carry the specific spring diameters and cable lengths those older doors use, so we can usually complete the job in one visit. For details on what we fix and current pricing, see Garage Door Repair in Palo Alto.
Garage Door Opener Repair in Palo Alto
Older openers in Palo Alto garages frequently survive for 20-plus years, and the common failures are gear wear in chain-drive units, capacitor failure on circuit boards after heat exposure, and sensor misalignment from door racking. We work on LiftMaster, Chamberlain, Genie, and Craftsman openers, and we treat the opener and the door as one system rather than isolating the motor and guessing at the mechanical side. For opener troubleshooting, remote programming, and motor replacement, see Garage Door Opener Repair in Palo Alto.
Garage Door Installation in Palo Alto
Garage door installation in Palo Alto is rarely a simple swap. The original openings on Eichler and 1950s – 1970s ranch homes were often framed to nonstandard widths and heights, so the first step is measuring the rough opening, headroom, and side clearance against what a stock door requires. A mild climate means weather stripping and thermal performance are less critical than on the coast, but the city’s design-review culture means many homeowners want a door that matches the original mid-century profile rather than a generic white panel. That’s why our Garage Door Installation work starts with the existing opening, not a catalog page. We quote the door, the labor, and any framing or track modification before you sign anything.
Garage Door Replacement
Signs you need it
The door sags visibly when open, panels are cracked or delaminating from age, or the track is so far out of square that rollers bind even after realignment.
What it costs in Palo Alto
A full replacement in Palo Alto typically runs $700 – $2,200 depending on door size, material, and whether custom work is required for a nonstandard opening.
How we do it
We measure the rough opening and headroom, confirm the spring and track spec against the new door’s weight, remove and haul the old door, then install, balance, and test the complete assembly.
Garage Door Installation Service
Signs you need it
You’re building an ADU or a new garage, or you’ve inherited an opening with no door at all and need a complete install from the rough frame.
What it costs in Palo Alto
New door installation in Palo Alto runs $700 – $2,200, with the labor portion of opener installation adding $250 – $550 if you want the opener done at the same time.
How we do it
We work from the rough opening dimensions, set the track and spring assembly to spec, hang the door in sections, install perimeter seals, and test the full cycle before we leave.
Commercial Garage Door Installation
Signs you need it
An office, lab, or retail space in Palo Alto needs a rolling steel or sectional door, or the existing commercial door has failed inspection for worn guides, broken springs, or missing safety sensors.
What it costs in Palo Alto
Commercial work is quoted by opening size and door type, but the labor and hardware typical of Palo Alto’s light-industrial areas falls within the $700 – $2,200 range for standard sectional installs.
How we do it
We measure the opening and operating clearances, specify a door rated for the cycle count the space needs, install the door and operator, and walk your staff through daily-use basics.
Garage Door Installation Contractors
Signs you need it
A general contractor or homeowner mid-remodel needs a garage door subcontractor who can work to the city’s design-review requirements without stalling the permit timeline.
What it costs in Palo Alto
Contractor-brokered installation work in Palo Alto runs $700 – $2,200 for the door itself, with the opener at $250 – $550; we quote flat so your GC knows the line item before framing is final.
How we do it
We coordinate with the GC on rough-opening dimensions and facade lines, order to the approved spec, and schedule install for the day the opening is ready.
Garage Door Seal Installation
Signs you need it
Winter rain pools at the base of the door, daylight shows around the perimeter, or the original wood jamb has swollen and split where the old seal failed.
What it costs in Palo Alto
Seal installation as a standalone job is part of our $150 – $600 repair range; we quote the exact length and seal type once we see the opening.
How we do it
We remove the failed seal, check the jamb and threshold for rot or racking, fasten the replacement to match the existing profile, and test the door’s closing pressure against the new seal.
What Garage Door Installation Costs in Palo Alto
| Item | Typical range in Palo Alto |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Seal, track, or minor structural correction | $150 – $600 |
How long does garage door installation take in Palo Alto?
A standard replacement takes four to six hours on site. Custom openings, Eichler low-headroom retrofits, or doors that need framing corrections can run a full day.
Will the price change once you see the opening?
No. We quote from a site visit or verified measurements, and the number we give you is the number you pay. Call (877) 358-3130 for a free estimate.
Brands We Service in Palo Alto
We work on LiftMaster, Chamberlain, Genie, and Clopay equipment, and our technicians carry the springs, rollers, sensors, and gear kits those brands use most in this area. That means the opener in your Eichler garage or the Clopay door on a newer rebuild gets diagnosed against the correct spec the first time, not after a parts run. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Palo Alto, CA
| Service | Typical range in Palo Alto |
|---|---|
| Garage door repair | $150 – $600 |
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes a Palo Alto job toward the top of those ranges is usually the age of the opening: nonstandard framing, low headroom on Eichler garages, and original hardware that needs to be re-engineered rather than swapped. What never changes is the price itself. We quote everything upfront, and the number we give you before work starts is the number on the invoice when the door is balanced and closing quietly.
Neighborhoods We Serve in Palo Alto
We work across all of Palo Alto, from the flat mid-century tracts in Midtown and Greenmeadow to the older lots in Professorville and the newer rebuilds on the Stanford side of El Camino. Our coverage includes all four Palo Alto ZIP codes: 94301, 94302, 94303, and 94304.
- Midtown
- Professorville
- Greenmeadow
- College Terrace
- Barron Park
Most Palo Alto repair calls get same-day or next-morning service, and installation is scheduled around your permit and design-review timeline.
Service Area – Cities Near Palo Alto
Our service trucks cover the Peninsula from Palo Alto outward, including Mountain View, CA to the south, Los Altos, CA in the foothills, Redwood City, CA to the north, and Sunnyvale, CA on the South Bay side. The same techs, the same truck stock, and the same upfront pricing apply across the whole area.
Serving Palo Alto, CA – Our Local Coverage Area
We’re based in the Palo Alto area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Palo Alto
Most repair calls in Palo Alto get a same-day or next-morning appointment. We stock the springs, cables, and opener parts that mid-century Peninsula garages use most often, so one trip is usually enough. Call (877) 358-3130 and we’ll give you a real arrival window, not a four-hour range.
Most like-for-like door replacements don’t require a permit, but any structural change to the opening, a full rebuild, or work in a historic district may. We tell you during the estimate whether your job falls under design review, and we work to the city’s current requirement.
Yes. We treat the door and the drive system as one unit, which matters on older Palo Alto homes where a failing door has been overloading an older opener for years. One call covers the diagnosis, the repair, and the test cycle.
If your garage door is acting up in Palo Alto, call Commodore Garage Door Repair at (877) 358-3130 for a free estimate. We’ll tell you exactly what’s wrong, what it costs, and whether repair beats replacement, before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Palo Alto Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Oscar Delgado"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Oscar Rodriguez"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Beatriz Vargas