Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Cupertino, CA
Garage door installation in Cupertino runs $700 – $2,200 for a complete sectional door, while targeted repairs on existing systems typically land between $150 and $600. What makes Cupertino different from neighboring Santa Clara or Sunnyvale is the sheer number of 1950s and 1960s ranch and Eichler-influenced homes whose original single-car wooden tilt-up doors are now 60 – 70 years old and being retrofitted to modern sectional doors with safety sensors. Commodore Garage Door Repair has served Cupertino since 2015, and our technicians know this housing stock before they pull up to the curb. Call (877) 358-3130 for a straight diagnosis and an upfront price.
Why Cupertino Homes Are Different
The post-war tract homes off Bollinger and Stelling were built when a garage was a carport with a door, not a finished room. Many of those original tilt-up wooden doors are still hanging, and they’re hitting the end of their service life at the same time. The wet winter months swell the wood at the seams, making panels bind against the jambs. The strong South Bay sun fades and cracks paint on south-facing doors, which lets moisture in and accelerates rot. When we convert one of those old tilt-up doors to a modern sectional, we often find the header is too shallow for standard track, which forces a low-headroom or high-lift layout. That’s a Cupertino-specific reality, and it’s why we measure before we quote. The single-car openings in ZIP 95014 tend to be narrow by modern standards, so replacement doors are frequently custom-ordered rather than pulled off a shelf.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Main Cupertino Services
Most Cupertino homeowners call us for one of two reasons: a door that stopped working or an opener that won’t respond. Both are covered in detail on their own pages.
Garage Door Repair in Cupertino
A door that’s off its tracks, a snapped spring, a cable that’s frayed through – these are the calls we take every week in ZIP 95014 and 94087. On the older ranch homes, the original hardware has often been painted over, rusted, or adjusted so many times that the door is fighting itself. We diagnose the full system, door and opener together, because a binding door burns out openers. Read the full breakdown of what we fix on our Garage Door Repair in Cupertino page.
Garage Door Opener Repair in Cupertino
When an opener in Cupertino fails, it’s usually the logic board, the gears, or the trolley – and the brand matters a lot for parts availability. We carry boards and gears for LiftMaster, Chamberlain, Genie, and Craftsman, so the diagnosis and the fix often happen on the same visit. If your opener is older and paired with a heavy wooden door, the opener has been working harder than it should for years. See the full scope on our Garage Door Opener Repair in Cupertino page.
Garage Door Installation in Cupertino
Garage door installation in Cupertino is rarely a simple swap. The post-war Eichler-style and ranch homes that fill ZIP 95014 were built with tilt-up wooden doors, and converting those to modern sectional doors with safety sensors means addressing the header, the jambs, and sometimes the side clearance. The shallow headers common in the tract homes near the old orchards off Bollinger and Stelling force low-headroom or high-lift track layouts, which is a different installation entirely from a standard 12-inch radius track. When you call, we measure what’s there and give you a written price before any work starts. Here’s what the job involves. For a broader look at the service, see Garage Door Installation.
Garage Door Replacement
Signs you need it
The door sags at one corner, panels are rotted or cracked through, or the door no longer seals against the ground.
What it costs in Cupertino
Complete garage door replacement in Cupertino runs $700 – $2,200 depending on size, material, and whether the opening needs jamb or header work.
How we do it
We measure the opening, check header and side clearance, recommend a door that fits the existing footprint, remove the old door, set new track, hang and balance the new door, and install safety sensors.
Garage Door Installation Service
Signs you need it
You’re converting a carport or old tilt-up opening to a modern sectional, or building new and need a door installed in an opening with no prior hardware.
What it costs in Cupertino
New garage door installation in Cupertino ranges $700 – $2,200 for the door, with opener installation adding $250 – $550.
How we do it
We confirm the opening dimensions, supply and install the door, mount the track and springs, hang the opener if you’re adding one, and test the full cycle including safety reversal.
Garage Door Seal Installation
Signs you need it
You can see daylight under the door, water pools along the threshold after rain, or leaves and dust blow in around the bottom edge.
What it costs in Cupertino
Garage door seal installation is a smaller job; counts toward the overall repair range of $150 – $600 depending on whether we’re also fixing the door that’s out of alignment.
How we do it
We pull the old seal, clean the retainer channel, slide in a new bulb or T-style seal sized to the door, and adjust the door travel so the seal compresses evenly.
What Garage Door Installation Costs in Cupertino
| Item | Typical range in Cupertino |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
How long does a garage door installation take in Cupertino?
Most single-door installations take one visit, usually four to six hours. Low-headroom conversions on older Cupertino ranch homes can push toward a full day because the track layout and header work are more involved.
Will the price change once you see the opening?
No. We quote the job after measuring and inspecting the opening, so the price you approve is the price you pay. If we find hidden header rot, we stop and show you before any additional work proceeds. Call (877) 358-3130 for a free estimate.
Brands We Service in Cupertino
We work on what’s already in your garage. Our technicians are fluent in Genie, Clopay, Amarr, and Wayne Dalton doors and openers, among the eight major brands we service. We keep common springs, cables, rollers, and opener parts in our local trucks, which means most repairs in Cupertino are completed on the first visit. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Cupertino, CA
| Service | Typical range in Cupertino |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| General garage door repair | $150 – $600 |
Cupertino prices run slightly higher than other South Bay cities when the job involves retrofitting an old wooden tilt-up opening to a modern sectional, because the header and jamb work adds labor. Whatever the job, the price is quoted and agreed before any work starts, so there’s no invoice surprise at the end.
Neighborhoods We Serve in Cupertino
We cover every ZIP in Cupertino: 94087, 95014, and 95015. Most calls come from the ranch tracts off Bollinger and Stelling, the Eichler-influenced streets north of Stevens Creek Boulevard, and the newer hillside homes along the western edge of the city. Our typical response time for Cupertino repair calls is same-day or next-morning.
- Neighborhoods off Bollinger Road
- Streets near Stelling Road
- Areas north of Stevens Creek Boulevard
- Western foothill zones off Highway 9
- Rancho Rinconada and surrounding tracts
Service Area – Cities Near Cupertino
Commodore Garage Door Repair is based in North San Jose and covers Cupertino plus the surrounding South Bay. We regularly run calls in Sunnyvale, CA, Los Altos, CA, Mountain View, CA, and West San Jose, CA, so if you’re just over the city line, the same crew can reach you without delay.
Serving Cupertino, CA – Our Local Coverage Area
We’re based in the Cupertino area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Cupertino
For a straight door-for-door swap in an existing opening, Cupertino homeowners typically do not need a permit. If you’re changing the opening size, cutting a new header, or converting a carport to an enclosed garage, that’s where city review may come in. We’ll tell you upfront which category your job falls into.
Most repair calls in ZIP 94087, 95014, and 95015 are scheduled same-day or next-morning. Emergency spring or cable failures get priority because a door with a snapped spring can’t be safely opened, and we don’t leave a Cupertino home with a garage that’s not secure.
That’s a large share of the homes we work on in Cupertino. Shallow headers require low-headroom or high-lift track kits, which we stock and install regularly. Your old tilt-up door can almost always be converted to a modern sectional, but the track layout has to be spec’d correctly. Call (877) 358-3130 for a free evaluation.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Cupertino Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Oscar Rodriguez"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Beatriz Vargas"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Wade Norris